Call 717-393-3694Mon–Fri · 8:30–4:30

Irrigation pipe friction loss calculator

Estimate the pressure lost moving clean water through a single, full pipe at a steady flow. Change the example values to match the mainline between your pump and the field.

Use the actual inside diameter. A C factor of 150 is a common starting estimate for smooth plastic water pipe. Use a value appropriate to the pipe material and condition.

What the result covers

This estimate covers straight-pipe friction with the same flow along the full length. Add elevation change, outlet pressure, and losses through fittings, valves and filters when determining the total head required.

Checking a traveler, pivot or drip system

Pipe runs with several outlets lose water along the way and need a section-by-section calculation. If you have multiple pipe sizes or branches, send a sketch with the pump and field elevations.

Farm and irrigation pump selection

Method: Hazen-Williams for water, using the U.S. customary equation in the USDA NRCS irrigation guide (PDF).